Version 2.00 ADA Cinema Rhapsody Mach 4 driver GTSSC4ADCR4

Driver Features:

- Live feedback on C4 Navigators

- Switching inputs, surround modes, recall presets

Driver documentation:   

Installation:

1. Drag and drop into configuration
2. Connect audio and Network in Connections
3. Adjust the Cinema Rhapsody ADA bus address to 00
4. Modify the ADA Lantronix network interface: Browse with Firefox to the IP of your suite and enter admin as username Leave blank the password. Select "Connection" and insert this settings:
   - Protocoll = TCP
   - Accept Incoming: Yes
   - Active Connect: Auto Start
   - Modem Mode: None
   - Local Port:48716
   - Remote Port: 48717
   - Remote Host: IP of your C4 controller
   - Common Options: Telnet Com Port Cntrl = Disable
   - Save with "OK" and "Apply Settings" The Lantronix Network module will restart.
5. Enter the names of the inputs in the Properties. For example: Input 1 on the ADA is named with DVD-PLAYER -> insert DVD-PLAYER into the field "Name input 1" Without assigning the inputs the driver will not work correctly 
6. Set the volume offsets for your sources in Properties. The driver will ajust the master volume right after the input was switched.   

Notes: 

• The second Zone / Record out is currently not fully supported.

• The driver has status and volume feedback to the C4 system.

• It supports all commands that are used for volume, sources, surround-modes. Balance, tones, volume, speakers, PEQ and Dolby volume recalls can be defined in the programming section in composer. Select the "Device Specific Command" in the Actions window.

• All recalls can also be executed from the Actions tab in Composer.

• Volume up/down clicks may not result in a change of the volume feedback. A click only does a 1/2 db step on the ADA.  

Programming Variables:

• CURRENT_SURROUND_MODE(string): The Variable can be used to display the actual surround mode on touch panels

• NETWORK_CONNECTION_STATE(boolean): The driver measures the network quality.  After 10 failed commands it will change the variable to false. If the connection is re-established this event will change to true.

• NETWORK_QUALITY_INDICATOR(number): This variable can be used to do a detailed analysis from the network connection. Possible values are 0 - 10. 0 = not connected, 10 = perfect connection.

• BALANCE_RECALL(number): Provides the last recalled preset for balance if it was recalled through the driver.

• TONES_RECALL(number): Provides the last recalled preset for tones if it was recalled through the driver.

• VOLUME_RECALL(number): Indicates the last recalled volume preset, if it was recalled through the driver.

• PEQ_RECALL(number): Indicates the last recalled PEQ preset, if it was selected through the driver.

• SPKR_RECALL(number): Indicates the last recalled speakers preset, if it was selected through the driver.

• DOLBY_VOL_RECALL(number): Indicates the last recalled Dolby volume preset, if it was selected through the driver

Pictures